Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

LAN & WAN News

Actiontec logoActiontec has released a new family of 802.11ac Wireless Network Extenders.

The new family of 802.11ac Wireless Network Extenders uses bonded MoCA 2.0 to extend Ethernet and Wi-Fi LANs via standard coax cabling.

The 2x2 2.4 GHz radio supports link rates up to 300 Mbps, while the 4x4 MU-MIMO ready 5 GHz radio supports rates up to 1.7 Gbps when used with devices supporting those link rates. The WCB6200Q has two Gigabit Ethernet Ports, while the WCB6240Q has four.

Other features include 4 SSIDs per radio, Wi-Fi Protected Setup, priority-based QoS and TR-069 management.

Actiontec WCB6200Q

Actiontec WCB6200Q

The WCB6200Q can be ordered from Actiontec's web store, but is presently showing as sold out. The adapter will be available from Amazon in October.

More LAN & WAN

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

I have what is probably an easy question that has already been answered. Is there a command to turn port forwarding on/off I can use through SSH? I am...
hellowhat type of load balancing algorithm ASUS implemented for RT-AC68U
Hi,I'm running a RT-AC68U at home with the latest Merlin firmware.I also confess I'm not an expert, especially on routing tables.Mine is reproduced be...
I did the auto update for the firmware and something seemed to have gotten messed up. I used the rescue mode and the firmware recovery tool to get the...
Hi,I have a Merlin 384.5 installed. All working like a charm. Recently I changed some settings in DHCP server menu, added some manually assigned IPs e...

Don't Miss These

  • 1
  • 2
  • 3