Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

LAN & WAN Reviews

1000 Mbps Powerline Gigabit Ethernet Adapter
At a glance
ProductZyxel 1000 Mbps Powerline Gigabit Ethernet Adapter (PLA5206KIT)   [Website]
Summary"1000 Mbps" HomePlug AV2-SISO adapter kit based on Broadcom's BCM60333 chipset
Pros• Seems to try to work around noise sources
• Can provide 300+ Mbps of total throughput with multiple traffic sources
Cons• Huge up and downlink throughput difference when running bi-directional traffic
• Expensive compared to better performing alternatives

Typical Price: $70  Buy From Amazon


While we await the first HomePlug AV 2 MIMO adapters, ZyXEL has released its PLA5206 1000 Mbps Powerline Gigabit Ethernet Adapter. Like many powerline adapters, the new ZyXEL is available only in a kit of two as the PLA5206KIT, which will currently run you about $130.

Let's establish right away that this is not an AV 2 MIMO adapter. Using official HomePlug AV 2 Profile nomenclature shown below, the PLA5206 supports the SISO 750 Mbps profile (SISO-750 for short).

HomePlug AV2 Profiles

HomePlug AV2 Profiles

So how can ZyXEL claim 1000 Mbps for a product designed to a "750 Mbps" profile? Here is ZyXEL's explanation:

  • Broadcom HPAV2 SISO device can use a bandwidth of up to 84.3 MHz (from ~1.8 MHz up to ~86.1 MHz).
  • In this bandwidth, a total of 3455 OFDM carriers are employed with a minimum symbol time of 40.96 us
  • The maximum bit allocation per carrier is 12
  • The maximum PHY rate is obtained as follows: 3455 carriers x 12 bits/carrier ÷ 40.96us = 1012.2 Mbps

This is clearly a theoretical calculation of raw bit rate, which will never be reached in real world use. It also begs the question of why the "official" AV 2 profiles have the numbers they have. But they are what they are.

Since I'm a fan of standards, I'll be using the profile nomenclature in the above table going forward to identify these products in our Charts, Finders and other product research tools.

The PLA5206 is larger than most HomePlug adapters I've seen lately. But the two-prong plug placement positions the adapter body so that it won't block the adjacent outlet in a standard U.S. duplex, as shown in the photo below. The serial number label specs a 100 - 240 VAC operating range.

ZyXEL PLA5206 plugged in

ZyXEL PLA5206 plugged in

The callout diagram below shows the adapter supports tri-color HomePlug link quality indication. The single Gigabit Ethernet port is centered on the bottom side of the adapter, with the Reset / Encryption button sitting to its left as shown in the opening product shot above.

ZyXEL PLA5206 callouts

ZyXEL PLA5206 callouts

The User Guide says the adapter goes into power-saving mode after 60 seconds of Ethernet inactivity and powers up again when activity resumes. I verified this by the following procedure, which ran without a hitch.

  1. Plugged in two adapters, let them link up and started a long ping from the HomePlug connected machine to another machine on my Ethernet LAN.
  2. Unplugged the cable connecting one adapter to my LAN switch. Verified that ping showed no response.
  3. Waited until the Ethernet unplugged PLA5206 entered power-save.
  4. Plugged Ethernet back in and verified that adapter powered up and ping returns resumed.


Broadcom has been largely absent from the HomePlug market, despite buying Gigabit powerline pioneer Gigle back in 2010. The only other Broadcom-based powerline products we've tested were Linksys' PLE400 and PLS400 back in 2012.

So the ZyXEL PLA5206 is a HomePlug AV2 coming-out party of sorts, since it uses Broadcom's BCM60333, which the company announced over a year ago.

The inside photo clearly shows the BCM60333, which is coupled to the sheet-metal thermal spreader in the top cover via the thermal pad stuck to the spreader. The small device below the BCM60333 is a Microsemi Le87401 PLC Single Channel Line Driver designed for use in HomePlug AV2, G.HN and MoCA devices.

ZyXEL PLA5206 inside

ZyXEL PLA5206 inside

It's interesting to note that the Broadcom device fills a hole in QCA's product offerings, shown in a table borrowed from the HomePlug AV2 Head-to-Head.

Qualcomm Atheros Supported HomePlug AV2 Profiles

Qualcomm Atheros Supported HomePlug AV2 Profiles

More LAN & WAN

Wi-Fi System Tools
Check out the new Wi-Fi System Charts, Ranker and Finder!

Featured Sponsors

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hi there!Like the title says, I have an N66U with 380.70 currently on it (latest supported version). Everything is working great (connectivity, range,...
I have a NAS server running subsonic and have been excluding it from the VPN, mostly just for crashplan backup speed. But now with my 86U I should be ...
May 18 01:56:42 pptpd[3981]: CTRL: Client control connection startedMay 18 01:56:45 pptpd[3981]: CTRL: Starting call (launching pppd, open...
Ok, I pulled the trigger a few weeks back and got the ROG. Once you get past the 8 legs, it's just a big box expected to do a big job. But I'm having ...
I am looking for 384.20308, it was released on 2-1-18. I have a TM-1900 that I converted to a 68U and from what I can tell that is the newest firmware...

Don't Miss These

  • 1
  • 2
  • 3