Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

NAS How To

RAID Configuration, Continued

Step 7: From the MegaRAID Management menu, hit the down arrow one time to the second option, "Initialize". Hit <Enter> next hit the space bar to select "Logical Drive 0" (see (Figure 20). Next, hit <F10> to initialize the drive.

Figure 20: Initializing the array

Figure 20: Initializing the array

A dialog will pop up that says "Initialize?" as shown in Figure 21. Move the cursor to "Yes" and hit <Enter>.

Figure 21: Confirm array initialization

Figure 21: Confirm array initialization

Initialization takes about 5 seconds on my system. During the process, it pops up an initialization meter that goes from 0 to 100 (see Figure 22).

Figure 22: RAID initialization progress

Figure 22: RAID initialization progress

After the drive is initialized, go back out to the main menu and reboot your system (see Figure 23).

Figure 23: RAID array initialization completed

Figure 23: RAID array initialization completed

We've now taken the four hard drives and turned them into a RAID 5 array that operating systems will see as a single hard drive. The next step in building your DIY RAID 5 NAS is to install the operating system you will use.

More NAS

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

I need a fast vpn router for online gaming and streaming from target.
I have several 2.4 Ghz smart devices connected to my RT-AC86U router currently running Merlin 384.15 firmware. As repeatedly advised, I have these dev...
Can someone explain the hierarchy in the 3 systems?Which one is the final authority in assigning the DNS servers to the clients?
Hi,as other users here I am getting these every 30 secondsFeb 27 16:08:04 dnsmasq-script[6527]: connect error: No such file or directoryFeb 27 16:08:0...
Anyone know if the HLA4205 MoCA 2.0 adapters have a web UI? I couldn't find any information on the docs, but usually this is not documented.

Don't Miss These

  • 1
  • 2
  • 3