Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

NAS Reviews

Introduction

Updated 7/17/2008: BitTorrent and Jumbo frame support added

D-Link DNS-323 2 Bay Network Storage Enclosure

 

At a Glance
Product D-Link 2 Bay Network Storage Enclosure (DNS-323)
Summary High-performance BYOD dual drive SATA NAS with gigabit Ethernet and many serving options
Pros • High performance
• Gigabit Ethernet
• Supports separate drives, JBOD, RAID 0, RAID 1
• Print, FTP, iTunes, UPnP AV servers
• Quiet
Cons • Clunky interface for user, group and network access mgmt.
• No FTP server logging
• Buggy UPnP AV media server

One of the latest NASes to hit the market is D-Link's DNS-323 2 Bay Network Storage Enclosure (323). The DNS-323 includes a number of features and turns in performance numbers that make it a strong candidate for any home network needing shared storage.

D-Link departed from its traditional case designs and came up with an attractively styled black case measuring 7 7/8"x 4" x 5" with silver accents. On the front panel, there's a large square power switch and three blue LED status indicators for network and drive activity.

Unlike some B.Y.O.D. (Bring Your Own Drive) NAS devices, the 323 is designed to accommodate SATA drives. Installation of the SATA drives is even simpler than installation of IDE drives in other devices because no tools are required and you don't have to connect any cables. To install the drives, you just slide the faceplate up and off, insert SATA drives into the two bays and gently push each drive to mate the drive and 323 connectors.

D-Link 323 with faceplate removed

Figure 1: D-Link DNS-323 with faceplate removed

The rear panel (Figure 2) has a power connector, 10/100/1000 Mbps Ethernet port, and a single USB port for sharing a printer via the 323's built-in print server. There are also two levers to help you eject the drives, and a vent for the ultra-quiet temperature-controlled fan. D-Link joined the growing list of NAS providers who include a gigabit Ethernet port. As you'll see in the performance tests shortly, the 323 is fast enough to make good use of the gigabit port, even without jumbo frame support.

Update 7/17/2008: Version 1.05 firmware added up to 9K jumbo frame support. Also added was support for BitTorrent downloading in the Download Scheduler.

Rear panel

Figure 2: Rear panel

More NAS

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Featured Sponsors



Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hi everyone. I’ve searched this topic and as far as I can tell, FA seems like voodoo. It recently seems to have just disappeared. I realise that one h...
Bought brand new from CraigsList -- box never opened. Intentionally did NOT connect upstream/WAN cable. At first, just wanted to measure Wi-Fi signal ...
Planning to set up an AiMesh with an ac88u & ac5300. My question is which one do I use as the main router?The Asus setup guide says I should use the m...
Hi,I have an Asus AC88U that I flashed latest Merlin on and it works except when in repeater mode I can not find the router to log into it at all and ...
I have the latest version (v384.5) of the Merlin firmware running on a ASUS RT-AC5300 router. I want to setup some type of "port mirroring" or iptable...

Don't Miss These

  • 1
  • 2
  • 3