Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless Features

The last time I wrote about the games that manufacturers are playing with single-stream draft 802.11n routers (Buyers Beware! Single Stream Draft 802.11n Products Bring Back Spec Spin), I warned that buyers looking for cheap draft 11n routers will need to look over their specs very closely. Well now it seems that Cisco is taking an even bolder step in marketing its entry level "N" router.

The WRT120N has come onto the scene since the previous article and is positioned to eventually replace the WRT110, which Cisco also specs as supporting draft 802.11n. But where the WRT110's advertising copy is somewhat fuzzy about whether or not it is a draft 11n router, the WRT120N's copy makes no bones about it. But while Cisco has dubbed the WRT120N "Wireless-N Home Router", there are three things that you need to know before you decide to buy.

It's Not Draft 2.0 Wi-Fi Certified

If you carefully check the WRT120N's specs (Figure 1), you'll see that it is spec'd as supporting 802.11b, g and draft 11n, it is certified only for 802.11b and g. So even though Cisco is marketing the router as a draft 2.0 802.11n "compliant" product, you'll need to take their word for it.

Linksys WRT120N spec

Figure 1: Linksys WRT120N spec

To be fair, Cisco couldn't submit the WRT120N for Wi-Fi Certification, because single-stream access points (and wireless routers) are not recognized in 802.11n. And while the Wi-Fi Alliance has plans to offer a certification for single-stream APs / routers, that program won't be available when the Alliance begins testing with its released-standard Certification suite sometime in the September / October time frame.

It Supports Only 150 Mbps Maximum Link Rate

When I wrote the previous article, I was aware of the WRT120N. But I didn't include it, since Cisco had requested delayed release of its FCC internal photos and provided no indication that it was a single-stream product when I inquired about its positioning. (Note to self: Ask more direct questions next time.)

The internal view of the WRT120N (Figure 2) reveals two antennas, which would lead you to believe that it is not a single stream product.

Linksys WRT120N internal

Figure 2: WRT120N internal

It's only when you look at the closeup view of the radio section that you see that an Atheros "Align" AR9285 single-stream N MAC/BB/radio is used.

WRT120N radio closeup
Click to enlarge image

Figure 3: WRT120N radio closeup

Since the WRT120N can support only single-stream 802.11n, its maximum link (raw data rate) is limited to 150 Mbps—a fact that Cisco mentions nowhere in the product's web page, downloadable spec sheet or even its User Manual for the product.

In contrast, NETGEAR and Belkin clearly state the 150 Mbps maximum speed of their WNR1000 and N150. D-Link is a bit less forthcoming and actually misleading about the speed limit of its single-stream DIR-600, saying that the router will "improve the speed of your wireless signal up to 4X faster than standard 802.11g". The last time I checked, 4 X 54 Mbps (11g's maximum link rate) = 216 Mbps.

You Don't Save That Much

So how much will you actually save by buying the non-Wi-Fi-Certified, believe-us-when-we-tell-you-its-802.11n-compliant, single-stream "N" WRT120N?

A Pricegrabber check showed the current lowest price for the WRT120N as $59.99 from NewEgg and A check of Cisco's next-step up, dual-stream, Draft 11n certified Linksys WRT160N showed multiple vendors selling new product at $80 and refurb product for $39.99. So, depending on your willingness to buy refurb, you actually lose money by buying the WRT120N, or save about $20. And if you shop carefully, you can find other, older certified draft 11n routers for less than or about the same as the WRT120N.

Bottom Line

It's bad enough that the leading consumer networking manufacturers are pushing reduced-capability, single-stream "N" product to market and worse that the Wi-Fi Alliance seems to be in no rush to get a single-stream 802.11n certification program in place.

But it's really disappointing that the consumer wireless market leader is making matters even worse by not clearly identifying its single-stream 11n router and making its 150 Mbps limitation clear to unsuspecting consumers. And it's unfortunate that this bad behavior is being rewarded, since according to Pricegrabber, the WRT120N is among its top-selling wireless routers.

My advice is still to steer clear of single-stream "N" routers until the Wi-Fi Alliance gets a certification program in place.

More Wireless

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

I have an Asus RT-68U and while it covers the house great, it's not so great out toward the back yard. The house has aluminum siding (which I suspect ...
Not sure whats going on. I'm trying to enable SSH but the option is missing from the Administration > System page. I've looked all over the forums and...
I have been trying to minimize interference with other neighbouring 5Ghz networks but does anyone know why the choices are limited to 36-48 and 149-16...
I'm playing around with iperf3 to test the speed between my laptop and the R7800 (running in AP mode) and between the R7800 and the firewall (OPNsense...
I recently had to login to my router because we had lost power and normally after doing that I have to go in and disable port forwarding for my intern...

Don't Miss These

  • 1
  • 2
  • 3